| Size: | |
|---|---|
| Quantity: | |
EN 10216-1 EN 10216-2 EN 10216-3 EN 10216-4
For producing storage tanks of heat-resistant steels used in boiler-making, tool-making;
For constructing pressure reservoirs and high pressure are simultaneously used to have summarized load and special conditions.
EN 10216-1 Non-alloy steel tubes with specified room temperature properties
EN 10216-2 Non alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3 Alloy fine grain steel tubes
EN 10216-4 Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-5 Stainless steel tubes
DIN EN 10216-1
Seamless steel tubes for pressure purposes - Technical delivery conditions -Part 1: Non-alloy steel tubes with specified room temperature properties
Specifies the technical delivery conditions for two qualities, T1 and T2, of seamless tubes of circular cross section, with specified room temperature properties, made of non-alloy quality steel.
DIN EN 10216-2
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007
The document specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.
DIN EN 10216-3
Seamless steel tubes for pressure purposes -Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, made of weldable alloy fine grain steel
DIN EN 10216-4
Seamless steel tubes for pressure purposes - Technical delivery conditions -Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
Specifies the technical delivery conditionsin two categories for seamless tubes of circular crossection, made with specified low temperature properties, made of non-alloy and alloy steel.
DIN EN 10216-5
Seamless steel tubes for pressure purposes - Technical delivery conditions-Part 5: Stainless steel tubes; German version EN 10216-5:2004, Corrigendum to DIN EN 10216-5:2004-11; German version EN 10216-5:2004/AC:2008
This Part of this European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross-section made of austenitic (including creep resisting steels) and austenitic-ferritic stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures. It is important that the purchaser, at the time of enquiry and order, takes in account the requirements of the relevant national legal regulations for the intended application.
| Steel grade | C max. | Si max. | Mn max. | P max. | S max. | Cr b max. | Mo b max | Ni b max. | Al tot min. | Cu b c max | Nb b max. | Ti b max. | V b max. | Cr+Cu+Mo+Ni b max. | |
| Steel name | Steel number | ||||||||||||||
| P195TR1 d | 1.0107 | 0,13 | 0,35 | 0,70 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P235TR1 d | 1.0254 | 0,16 | 0,35 | 1,20 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P265TR1 d | 1.0258 | 0,20 | 0,40 | 1,40 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| Steel grade | C max. | Si max. | Mn max. | P max. | S max. | Cr b max. | Mo b max | Ni b max. | Al tot min. | Cu b c max | Nb b max. | Ti b max. | V b max. | Cr+Cu+Mo+Ni b max. | |
| Steel name | Steel number | ||||||||||||||
| P195TR2 | 1.0108 | 0,13 | 0,35 | 0,70 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 | 0,02 d | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P235TR2 | 1.0255 | 0,16 | 0,35 | 1,20 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 | 0,02 d | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P265TR2 | 1.0259 | 0,20 | 0,40 | 1,40 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 | 0,02 d | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
For producing storage tanks of heat-resistant steels used in boiler-making, tool-making;
For constructing pressure reservoirs and high pressure are simultaneously used to have summarized load and special conditions.
EN 10216-1 Non-alloy steel tubes with specified room temperature properties
EN 10216-2 Non alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3 Alloy fine grain steel tubes
EN 10216-4 Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-5 Stainless steel tubes
DIN EN 10216-1
Seamless steel tubes for pressure purposes - Technical delivery conditions -Part 1: Non-alloy steel tubes with specified room temperature properties
Specifies the technical delivery conditions for two qualities, T1 and T2, of seamless tubes of circular cross section, with specified room temperature properties, made of non-alloy quality steel.
DIN EN 10216-2
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007
The document specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.
DIN EN 10216-3
Seamless steel tubes for pressure purposes -Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, made of weldable alloy fine grain steel
DIN EN 10216-4
Seamless steel tubes for pressure purposes - Technical delivery conditions -Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
Specifies the technical delivery conditionsin two categories for seamless tubes of circular crossection, made with specified low temperature properties, made of non-alloy and alloy steel.
DIN EN 10216-5
Seamless steel tubes for pressure purposes - Technical delivery conditions-Part 5: Stainless steel tubes; German version EN 10216-5:2004, Corrigendum to DIN EN 10216-5:2004-11; German version EN 10216-5:2004/AC:2008
This Part of this European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross-section made of austenitic (including creep resisting steels) and austenitic-ferritic stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures. It is important that the purchaser, at the time of enquiry and order, takes in account the requirements of the relevant national legal regulations for the intended application.
| Steel grade | C max. | Si max. | Mn max. | P max. | S max. | Cr b max. | Mo b max | Ni b max. | Al tot min. | Cu b c max | Nb b max. | Ti b max. | V b max. | Cr+Cu+Mo+Ni b max. | |
| Steel name | Steel number | ||||||||||||||
| P195TR1 d | 1.0107 | 0,13 | 0,35 | 0,70 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P235TR1 d | 1.0254 | 0,16 | 0,35 | 1,20 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P265TR1 d | 1.0258 | 0,20 | 0,40 | 1,40 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| Steel grade | C max. | Si max. | Mn max. | P max. | S max. | Cr b max. | Mo b max | Ni b max. | Al tot min. | Cu b c max | Nb b max. | Ti b max. | V b max. | Cr+Cu+Mo+Ni b max. | |
| Steel name | Steel number | ||||||||||||||
| P195TR2 | 1.0108 | 0,13 | 0,35 | 0,70 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 | 0,02 d | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P235TR2 | 1.0255 | 0,16 | 0,35 | 1,20 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 | 0,02 d | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
| P265TR2 | 1.0259 | 0,20 | 0,40 | 1,40 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 | 0,02 d | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
